TexasCoolingChecked Reviewed

What does it cost to replace an AC in Texas in 2026?

A new AC likely costs more now than it did a few years ago, and it's not just your installer. On January 1, 2025, a nationwide refrigerant change took effect for new systems. Here's what Texans pay now, why, and when a repair still makes sense.

Published 8 min readBy The Day Company review team · How we score
$5,500Median heating and cooling job
R-410A rule changedEPA, May 2026
Short answer

There’s no official Texas price list. A federal survey found homeowners spent a median of $5,500 on heating and cooling work in 2021 to 2023, up from $4,200 two years earlier. That covers big and small jobs, so a whole new system can run higher. New systems use new refrigerants since 2025, but in May 2026 the EPA said leftover R-410A systems built before 2025 can still be installed. In Texas, new central ACs must be at least 13.8 to 14.3 SEER2.

Estimate your AC cost
$5,500Median heating and cooling job, U.S., 2021–2023
+31%Rise in that median in two years
13.8–14.3SEER2 minimum in Texas, by AC size
Up to $310Per ton, CPS Energy AC rebate

The 5 things to know

  • Heating and cooling jobs run about $5,500 at the median. That’s federal data. Whole systems can cost more.
  • New systems switched refrigerants in 2025. R-454B and R-32 replaced R-410A.
  • Leftover R-410A systems are legal again. The EPA dropped its 2026 install deadline in May 2026.
  • Old R-410A units still work. They can still be repaired, but the old refrigerant is being phased down.
  • Size it right. Ask for a Manual J load calculation, not a guess.

Built on public data from the U.S. Environmental Protection Agency, the U.S. Department of Energy, the Census Bureau and HUD, CPS Energy and ENERGY STAR.

01 · The price

How much does it cost to replace an AC in Texas?

No one publishes an official Texas price list. The best public number is a federal survey of what homeowners actually spent. In 2021 to 2023, the median heating and cooling job cost $5,500, and the price is climbing fast.

What homeowners spent on heating and cooling work (median, U.S.)
2017–2019
$4,000
2019–2021
$4,200
2021–2023
$5,500

Bars start at zero. American Housing Survey, by the Census Bureau and HUD. It covers all heating and cooling jobs nationwide, big and small, so a full new system often costs more.

What raises or lowers an AC quote
On your quoteWhy it matters
Size (tons)Bigger homes need more cooling, and each ton adds cost.
SEER2 ratingHigher ratings cost more up front and less to run.
AC or heat pumpA heat pump also heats, so it can replace your furnace.
Ducts and wiringLeaky ducts or an old electrical panel add work.
RebatesYour utility may take hundreds off. Ask before you sign.
Most CPS Energy pays back on a new AC or heat pump
3 tons
Up to $930
4 tons
Up to $1,240
5 tons
Up to $1,550

Bars start at zero. CPS Energy pays $90 to $310 per ton, and more efficient systems earn more. Other utilities pay through approved contractors; see utility rebates.

02 · Why prices rose

Why did AC prices go up in 2025 and 2026?

A nationwide refrigerant change. Under a federal law called the AIM Act, the U.S. is cutting the use of high-warming refrigerants. Starting January 1, 2025, new home AC and heat pump systems can't be made with R-410A.

  1. 1
    Before 2025: R-410A

    The standard refrigerant in home AC systems for years.

  2. 2
    January 1, 2025: new refrigerants

    New systems use R-454B or R-32 instead, which warm the climate far less.

  3. 3
    May 2026: leftover systems allowed

    The EPA dropped its 2026 install deadline. R-410A systems built before 2025 can still be installed until they run out.

  4. 4
    Through 2036: supply keeps shrinking

    Production of these older refrigerants is being cut in steps, reaching an 85% cut by 2036.

How much each refrigerant warms the climate
R-410A (old)
2,088
R-32 (new)
675
R-454B (new)
466

Bars start at zero. Global warming potential, compared with carbon dioxide at 1. The EPA’s limit for new home systems is 700.

Offered an R-410A system in 2026? It’s legal if every part was built before 2025, per the EPA’s May 2026 rule, as reported by ACHR News, an HVAC trade paper. Ask how old the equipment is, and what refrigerant for future repairs may cost.
Are the new refrigerants safe? R-454B and R-32 are rated "A2L," meaning mildly flammable. Systems are built with safety features for them, and they're approved for home use. Day to day, your AC works the same.
03 · Efficiency

What SEER2 rating do I need in Texas?

Texas is in the Department of Energy's Southeast region. New split-system central ACs must be at least 14.3 SEER2 (about 15 SEER on the old scale) if they're 3.5 tons or smaller, and 13.8 SEER2 if they're 4 tons or bigger. Higher numbers use less power but cost more up front.

13.8 to 14.3 SEER2The floor for new central ACs in Texas, by size.
15 to 17 SEER2A common middle ground for long Texas summers.
18 SEER2 and upWorth it mostly if you'll run it hard for many years.
Power used for the same cooling, by SEER2 rating
14.3 SEER2
100%
16 SEER2
About 89%
18 SEER2
About 79%
20 SEER2
About 72%

Bars start at zero. Math from the rating itself: SEER2 is cooling delivered per unit of power, so a higher number means less power for the same cooling.

Cooling is one of the biggest parts of a Texas summer bill, so efficiency matters here more than in most states. See why Texas bills run high.

04 · Repair or replace?

Should I repair or replace my old R-410A AC?

Old R-410A systems are still legal to run and service. The catch: as supply shrinks, refrigerant for repairs costs more each year.

Repair makes sense ifUsually a younger unit

Your system is under about 10 years old, the fix doesn't involve a big refrigerant leak, and it's been reliable.

Replace ifUsually an older unit

It’s over 10 years old and needs a costly refrigerant repair. ENERGY STAR suggests thinking about a new system once yours passes 10 years.

Repairs are still allowed: the EPA lets makers supply parts labeled for fixing existing systems. Hail-dented unit? It may be part of an insurance claim; see our hail claim guide.

Repair or replace? The 5,000 ruleA common HVAC rule of thumb. Nothing is saved.
Replacing likely makes more sense

12 years times $600 is 7,200, over the 5,000 line.

Multiply your AC’s age by the repair quote. Over 5,000 usually points to replacing, and under points to repairing. It’s a rule of thumb, not a guarantee.

05 · Sizing

How many tons of AC does my home need?

A rough rule in Texas is one ton of cooling for every 400 to 600 square feet. A proper Manual J load calculation is the real answer.

Rough AC size by home size
1,000 sq ft
2 tons
1,500 sq ft
3 tons
2,000 sq ft
4 tons
2,500 sq ft
5 tons

Bars start at zero. About 500 sq ft per ton, a rough rule. A Manual J calculation gives the real answer.

Rough AC sizing for Texas homes
Home sizeRough AC size
1,000 sq ftAbout 2 tons
1,500 sq ftAbout 3 tons
2,000 sq ftAbout 4 tons
2,500 sq ftAbout 5 tons

At about 500 sq ft per ton. Insulation, windows, sun and ceiling height change the answer, so ask for a Manual J calculation.

06 · Free tool

What size AC do you need, and what rebate can you get?

Type your home size and pick your utility. Add a quote to see your price per ton and your cost after rebates.

AC size and rebate checkerEstimates only. Nothing is saved.
Who delivers your power?
About 4 tons

A 2,000 sq ft home needs roughly 4 tons. CPS Energy pays $90 to $310 per ton, so about $360 to $1,240 back, depending on efficiency.

Sizing uses about 500 sq ft per ton, a rough rule; a Manual J calculation gives the real answer. Rebates from CPS Energy’s published rates. Not a quote.

Read about rebates from CPS Energy, Austin Energy, Oncor and CenterPoint.

07 · Fair quote

How do I avoid overpaying for a new AC?

Compare quotes on the same things, and don't buy more than you need.

  1. 1
    Get two or three written quotes

    Each should list the tonnage, SEER2 rating and refrigerant.

  2. 2
    Ask for a load calculation

    An oversized AC costs more and can leave your home clammy.

  3. 3
    Ask what's included

    Ductwork, the refrigerant lines, electrical work, permits and haul-away.

  4. 4
    Consider a heat pump

    It cools and heats in one system. See heat pump or AC?

Timing and permits: Spring and fall are often the easiest times to schedule a replacement, outside the summer rush. Many Texas cities require a permit, so ask your contractor to pull it and list it on the quote.

Before you buy, check utility rebates on eficient systems. If your income qualifies, free weatherization can repair or replace old systems, and federal HEAR rebates for heat pumps are coming. Planning other projects? See roof costs and solar costs. A smart thermostat can also earn bill credits; see demand response programs.

08 · Quick answers

AC replacement questions, answered

How much does it cost to replace an AC in Texas?

There’s no official Texas price list. A federal survey found homeowners spent a median of $5,500 on heating and cooling work in 2021 to 2023, up 31% in two years. A whole new system can cost more, so get two or three written quotes and check your utility’s rebates.

Why did AC prices go up in 2025?

Partly a nationwide refrigerant change. Since January 1, 2025, new home AC systems can’t be made with R-410A and use R-454B or R-32 instead. Federal survey data shows heating and cooling jobs rose from a $4,200 median to $5,500 in two years.

Are R-454B and R-32 safe?

They're rated A2L, meaning mildly flammable, and systems are built with safety features for them. They’re approved for home use, and your AC works the same day to day.

Should I repair or replace my old R-410A AC?

If it's under about 10 years old and the fix is simple, repair often makes sense. If it's 10 to 15 years old and needs a costly refrigerant repair, replacing it usually makes more sense, since the old refrigerant is being phased down.

What SEER2 rating do I need in Texas?

Texas is in the Department of Energy's Southeast region. New split-system central ACs must be at least 14.3 SEER2, about 15 SEER on the old scale, if they're 3.5 tons or smaller, and 13.8 SEER2 if they're 4 tons or bigger. Higher ratings use less power, which can pay off in long Texas summers.

How many tons of AC do I need?

A rough Texas rule is one ton for every 400 to 600 square feet, so a 2,000 square foot home often needs about 3.5 to 5 tons. A Manual J load calculation, which looks at insulation, windows and sun, gives the right size.

Will my old AC stop working because of the R-410A change?

No. Existing R-410A systems are legal to run and repair. The rule stops new R-410A systems from being made, and since May 2026, leftover systems built before 2025 can still be installed. As production is cut, the old refrigerant gets harder to find, which can raise repair costs.

Is a heat pump worth it in Texas?

Often. A heat pump cools like an AC in summer and heats efficiently in mild Texas winters, replacing two systems with one. It costs more up front. If you heat with cheap natural gas, it may take longer to pay off.

How long does an AC last in Texas?

It depends on use and upkeep, and Texas heat makes systems run hard much of the year. ENERGY STAR suggests thinking about a new, efficient system once yours is more than 10 years old. Filter changes and a yearly tune-up help it last.

How do I avoid overpaying for a new AC?

Get two or three written quotes that list tonnage, SEER2 rating and refrigerant, and ask for a load calculation instead of a guess. Ask what's included, from ductwork to permits, and don't pay for more efficiency than you'll use.

Up nextShould your new system be a heat pump?How a heat pump and an AC compare on Texas summers, winters and running costs. Read the guide
Where to next

What do you want to do next?

Every Texas guide, by topic

Browse every guide on the Texas hub. Or see every state's average price on our price map.

Sources

Sources and updates

Sources (9)
Changelog · 4 updates, newest November 16, 2026
  • November 16, 2026: Rechecked every number against its source; nothing needed to change.
  • October 16, 2026: Corrected the Department of Energy region name to Southeast.
  • October 5, 2026 (evening update): Added an “Up next” link to our heat pump vs. AC guide and all 10 company reviews in the guide map.
  • October 5, 2026: Guide published: what Texas AC replacement costs per federal survey data, rebates by utility, the 2025 refrigerant switch and May 2026 R-410A rule, SEER2 minimums, repair or replace, sizing and a rebate checker.

How to cite this page: The Day Company, "What does it cost to replace an AC in Texas in 2026?", updated November 16, 2026, https://theday.company/tx/ac-replacement-cost.

Reviewed is the last day a person re-checked every number on this page.

Price ranges come from industry cost guides and vary with size, efficiency, ductwork and labor; the refrigerant price effect is an industry estimate. Sizing is a rule of thumb, not a load calculation. This is not HVAC advice. The Day Company is not affiliated with any contractor or manufacturer named here.