Metal roofing in Coeur d'Alene and the snow it sheds

Panels shed snow faster than shingles, and that slide is the design problem. The city still wants a permit, a fire rating, and solid wood under whatever you put on.

Get my free roof inspection
40 psfCoeur d'Alene roof snow load
60 psfCoeur d'Alene ground snow load
Short answer

Metal lets snow leave the roof in sheets. That is easier on the deck and harder on anything under the eaves. Ask where snow guards would sit. Coeur d'Alene's city FAQ sets roof snow at 40 pounds per square foot and ground snow at 60. A re-roof, metal or not, needs a permit.

The 4 things to know

  • Sliding snow is the local issue, not a catalog slogan. Guards are the pieces that hold snow so it does not dump on a door, a deck, or a walk. The city FAQ does not name a guard brand or a spacing rule.
  • Fire class is on the product listing, not in the word "metal." The city wants Class A or Class B and a 25-year rating on a re-roof. A panel meets that line only when its own listing says so.
  • No metal-only price is published here. City re-roof reports mix materials, and they do not mark which jobs were metal. A metal price invented from that mix would be false.
  • Metal does not cancel ice dams. Ice at the eaves comes from heat leaving the house. Air sealing and attic insulation still matter.
01 · Snow slide

How metal behaves in North Idaho snow

A metal surface is slicker than a shingle, so snow that a shingle roof might hold can release all at once. The release can clear the deck, which is why people in snow country ask about metal. The same release can hit a porch, a car, or a person at the door.

Coeur d'Alene designs the roof for 40 pounds on each square foot. The ground beside that figure is 60 pounds per square foot. Those are design loads from the city FAQ, not a scale you put on the lawn after one storm. A deck that is already soft still fails the city's wood rule, metal panels or not. Dry rot and fungus-damaged boards are replaced on a re-roof.

Design snow load, pounds per square foot
Coeur d'Alene roof
40 psf
Coeur d'Alene ground
60 psf
Hayden roof, south of Miles
40 psf
Hayden roof, north of Miles
50 psf
Hayden ground, north of Miles
70 psf
Kootenai County zone C roof
60 psf minimum

Hayden numbers are from the April 10, 2023 design sheet. County zone C is a minimum in the residential permit guide. Zone D is engineered and has no single public number. Coeur d'Alene's city wind speed was not on the FAQ.

County houses outside city limits use zones. Zone A is at least 40 psf on the roof, zone B 50, zone C 60. That same county booklet puts ultimate wind at 115 mph, frost depth at 24 inches, and seismic category C. Hayden adds its own wind line: 90 mph, and a 115 mph three-second gust, plus frost to 24 inches and climate zone 5. Do not paste Hayden's wind onto a Coeur d'Alene city address. The city FAQ we used did not print a wind speed.

Post Falls is left blank on purpose. The city design PDF answered with a 404 error on November 8, 2026.

02 · Guards

Snow guards

Snow guards, sometimes called snow stops, break up the slide or hold the pack until it melts in smaller pieces. We did not find a Coeur d'Alene ordinance that sets guard size, row count, or which entries must be covered. Manufacturer spacing charts were not pulled for this page, so no spacing number is printed.

  • Doors, decks, and the walk to the car are marked on a sketch before the panels are ordered.
  • Guards are in the written price, not a surprise on install day.
  • The roofer explains what happens to gutters when a sheet of snow lets go.
  • A bid that says "metal never needs guards" with no look at the eaves.
  • Guards screwed down in a pattern nobody can point to on a drawing.

Gutter damage from sliding snow is a reason to talk about guards and about where downspouts dump. It is not a claim that guards are required by code. Ask. If the answer is "we never use them," ask what protects the front door.

03 · Rules

Permit, fire rating, and the deck

A metal re-roof in Coeur d'Alene is still a re-roof. The permit can be picked up over the counter. Fees follow the job value declared on the permit, with a 3% add-on if you pay the city by card. Call the inspection in yourself. The city wants that request one working day ahead.

The material line on the FAQ is "new minimum Class A or B, 25 year roofing," plus flashing and ventilation of enclosed spaces. Class A and Class B are fire ratings. They show up on the product listing. We did not verify that every metal panel on the market carries one of those ratings. Ask to see the listing for the exact panel, color, and assembly. If the listing is missing, do not treat the word "metal" as a pass.

City re-roof lines that still apply to metal
LineWhat to ask the roofer to show
PermitThe over-the-counter permit, before tear-off
Fire ratingThe panel's own Class A or Class B listing
Year ratingWhere the product states at least 25 years
FlashingNew metal at chimneys, walls, and valleys
Attic airHow enclosed spaces stay ventilated
Soft woodWhich boards fail the dry-rot check and will be replaced

Houses outside city limits in Kootenai County usually get a re-roof permit the same day, and the county says plans are not required for that permit. Fee amounts for the county were not in the guide. Standing seam is a panel shape with raised ribs. The city rule cares about the fire listing and the 25-year rating, not about the shape's nickname.

04 · Compare

Metal and shingles, side by side

An old USDA Forest Service training slide lists typical lives. Sheet metal is 20 to 50 years or more. Asphalt composition shingles are 15 to 30 years. Tile is listed at 50. Those ranges credit trade practice on the slide. They are not a warranty, and they are not a Coeur d'Alene test of any one brand.

Sheet metalTypical life 20 to 50 years or more on the USDA slide.
Asphalt shinglesTypical life 15 to 30 years on the same slide.
The deck under bothCity rule: dry rot and fungus-damaged wood comes out on a re-roof.

Noise in rain or hail was not measured in any source we used for Coeur d'Alene. Fastening, the deck, and what sits under the panel all change the sound. Ask to stand under a finished local job during a rain, or ask what underlayment and deck the bid includes. Underlayment is the layer between the deck and the panels.

Ice at the eaves is a heat problem. The Department of Energy guide, updated December 6, 2022, says dams stay unlikely when the ceiling is sealed against air leaks, baffles keep a path from the soffit to the ridge, and the attic is well insulated. A slick metal surface does not replace that attic work. The federal guide also finds ice ridges in valleys and tight against chimneys. Minnesota's extension service calls the ridge a block that stops meltwater, and it forms when snow is still up there, the upper roof is warmer than 32°F, and the edge is colder than 32°F.

05 · Cost

Price without a metal-only number

The city issued-permit reports for November 2025 through October 2026 do not label re-roofs as metal or shingle. The mixed set of single-family re-roofs has a middle declared value of $13,725 on 560 permits. That number is on the replacement guide, with the quarter marks. It is not a metal price. Printing it here as "what metal costs" would mix jobs the city did not split. There is no dollar-per-square-foot metal figure in that file, because squares are not listed at all.

What we can sayDeclared values

Full re-roofs, all materials together, middle value $13,725 on the permit.

What we will not sayNo metal price

A metal-only Coeur d'Alene price was not in the public reports.

Area snow for Hayden and the county is also summarized on the Coeur d'Alene roofing page.

Free for you. The roofing company pays us a flat monthly fee. The Day Company is a free matching service, not a contractor. Before you hire any roofer, check their registration with Washington L&I or the Idaho Contractors Board. We do not answer, record or receive these calls.

06 · Ask first

Five questions before the panels are ordered

Bring these to the one inspection. The photo report should answer them in pictures, not only in a spoken pitch.

  1. 1
    Which panel, and where is the fire listing.

    Class A or Class B has to be on that sheet.

  2. 2
    Where snow will slide, and whether guards are in the price.
  3. 3
    Which boards are soft.

    The city expects those replaced.

  4. 4
    How the attic will vent

    after the new surface is on.

  5. 5
    The registration.

    Private work over $2,000 needs an Idaho contractor registration. Look it up before you sign. The number belongs on the contract.

One roofer in our network can walk the roof and leave that photo report. Hold the report next to any other number you already collected. The match is a single roofer. It is not a pile of competing bids. A storm that starts the metal job has its own photo list on storm damage.

Your next step

Match with one local roofer to look at the deck and talk through snow guards. The visit includes a photo report you can keep.

Read nextRoof replacement in Coeur d'Alene Read it
07 · Quick answers

Questions, answered

Is a metal roof a good fit for North Idaho snow?

It sheds snow, which can lighten the deck and can unload that snow onto the ground below. Coeur d'Alene's roof design load is 40 pounds per square foot. Plan for the slide, and for guards where people walk.

Do I need snow guards?

The city FAQ does not require a specific guard. Ask for them over doors and walks if snow can slide there. No spacing standard was verified for this page, so the roofer should show a sketch rather than a slogan.

Does a metal roof need a permit in Coeur d'Alene?

Yes when it is a re-roof. The permit is available over the counter. Fees follow the declared job value, and a card payment adds 3%. Give one working day of notice for the inspection.

Are metal roofs noisy?

A Coeur d'Alene noise test was not in the sources we used. Sound changes with the deck and the layer under the panel. Ask what those layers are, and ask to hear a finished roof in the rain if you can.

How long does a metal roof last?

A USDA training slide lists sheet metal at 20 to 50 years or more, as a typical range, not a warranty. Asphalt shingles on the same slide are 15 to 30 years. Your climate, the coating, and the install all sit outside that slide.

How much does a metal roof cost in Coeur d'Alene?

The city's re-roof permits do not separate metal from other materials, so this page does not give a metal price. The mixed re-roof median of $13,725 is a declared permit value for all single-family re-roofs, explained on the replacement page. It is not a metal quote.

Does metal meet the city's Class A or Class B rule?

Only if that panel's listing says Class A or Class B and the product carries at least a 25-year rating. The city FAQ sets that bar for new roofing. We do not treat every metal roof as already approved.

Next steps

Read next

Sources

Sources and updates

Hayden's design criteria sheet, dated April 10, 2023, sets roof snow at 40 pounds per square foot south of Miles Avenue and 50 pounds per square foot north of it. Coeur d'Alene's FAQ, read the same week, uses 40 on the roof and 60 on the ground.

Built on public data from the City of Coeur d'Alene Building Services FAQ, the Hayden design sheet dated April 10, 2023, the Kootenai County residential permit guide, the USDA Forest Service life slide, and the Department of Energy ice-dam guide, read November 8, 2026.

Sources (9)
Changelog · 1 update, newest November 8, 2026
  • November 8, 2026: First published.
Published 8 min readBy The Day Company review teamReviewed

How to cite this page: The Day Company, "Metal roofing in Coeur d'Alene and the snow it sheds", updated November 12, 2026, https://theday.company/id/roofing/coeur-d-alene/metal-roofing.

Reviewed is the last day a person re-checked every number on this page.

Snow loads are design numbers from city and county sheets, not a measurement of last winter's storm. Life spans are typical ranges from a federal training slide. The Day Company does not sell or fasten panels. One local roofer in our network does the look-over and leaves the photo report. No metal price on this page is a quote. How the match is paid is on how we make money. The Day Company is a free matching service, not a contractor. Before you hire any roofer, check their registration with Washington L&I or the Idaho Contractors Board. We do not answer, record or receive these calls.